THERE ARE THREE POSSIBILITIES:
1. IF THE MASS = 8 = IS "LESS" ROTATION WOULD NOT START.
2. IF THE MASS = 8 = IS "MORE" THE TUBE = 1 = WOULD ACT
LIKE A PENDULAM. ROTATION WOULD NOT MATERIALISE.
3, ONLY WHEN THE MASS = 8 = IS PROPERLY ARRANGED BY
VARIOUS TRIALS, THE MASS = 8 = WOULD SLOWLY PASS THE
LOWER TWO QUADRANTS AND ENTER THE THIRD QUADRANT.
IMMEDIATELY THE MASS = 8 = WOULD FLOW BACK TO THE RIGHT
END. THE ROTATION REPEATS AND IS NEVER STOPPED EXCEPT
BY MANUAL MEANS.
THIS CRITICAL MASS = 8 = MAINLY DEPENDS ON THE MASS OF THE FLY-WHEEL WHICH IS ALSO THE ARMATURE OF A DYNAMO. THE PRINCIPLE IS THAT, THE SPEED OF THE PENDULUM IS SLOWED DOWN AND ITS AMPLITUDE IS INCREASED, BY COMBINING THE PENDULUM WITH A FLY-WHEEL.
POWER STROKE HAPPENS IN THE LOWER TWO QUADRANTS. IN THE UPPER TWO QUANDRANTS THE MASS RETURNS TO THE ORIGINAL POSITION, AFTER A FREE-FALL, AND THE CYCLE REPEATS.
TWO FREE-FALLS FROM LEFT TO RIGHT ARE AVAILABLE IN EVERY REVOLUTION. THIS SUPPLIES THE CONTINUOUS ENERGY TO THE SYSTEM FROM GRAVITY FORCE.
THIS ENGINE WOULD WORK ON EARTH, UNDER SEA, AND IN OTHER PLANETS. THERE IS NO UPPER LIMIT FOR THE SIZE OF THE MACHINE AS GRAVITY IS FREELY AVAILABLE IN ANY PLANET.
THIS ENGINE WOULD NOT WORK IN SPACE, WHERE THERE IS NEGLIGIBLE GRAVITY.
THE GRAVITY FORGE OF THE EARTH IS TRAINED IN THIS DEVICE TO WORK IN A UNIDIRECTIONAL MOTION RESULTING IN A CONTINUED TORQUE BEING GIVEN TO THE SHAFT IN THE CLOCK-WISE DIRECTION ONLY. SIZE OF THE FLYWHEEL, THE FALLING MASS, SIZE OF TUBE = 1 = AND THE DISTANCE OF FALL ARE JUDICIALLY ARRANGED FOR MAXIMUM EFFICIENCY OF THE MACHINE.

MANUFACTURE J
THE GRAVITY WHEEL SYSTEM ROTATES ABOUT A CENTRAL SHAFT WHICH IS SUPPORTED ON THREE BALL-BEARINGS, INDEPEN-DANTLY FIXED ON THREE PILLARS.
FIG 1 : SHOWS ELEVATION OF THE GRAVITY WHEEL,'
FIG 2 : SHOWS THE PLAN VIEW OF THE GRAVITY WHEEL.
FIG 3 : SHOWS THE END VIEW OF THE MACHINE-SUPPORT.
FIG 4 : SHOWS THE CROSS-SECTION OF THE TUBE = 1 = AT THE
SHAFT AND ITS CONNECTION WITH THE SHAFT.
DESCRIPTION OF PARTS :
1. TRANSPARENT PLASTIC SQUARE TUBE PROPERLY BENT AS SHOWN IN THE DIAGRAM.
2. METAL CLAMP WITCH CONNECTS THE CENTRE OF TUBE = 1 = WITH THE SHAFT = 9 = .
3. FLY-WHEEL WHICH IS ALSO THE ARMATURE OF A DYNAMO.
4. TRANSPARENT SQUARE PLASTIC CLOSING LIDS OF THE TUBE = 1 = RIGIDLY PASTED WITH TUBE = 1 =.
5. THE THREE SUPPORTS OF THE MACHINE WITH THE SHAFT, IN BALL-BEARINGS .
6. DIRECTION OF ROTATION,
7. CARBON BRUSHES TO COLLECT ELECTRICAL CURRENT FROM THE FLY-WHEEL-ARMATURE.
8. THE FLOWING MASS - USUALLY SMALL STEEL BALLS OF BALL-BEARINGS, PROPERLY OILED FOR EASY FLOW.
9. SHAFT OF THE MACHINE SUPPORTED ON THREE BALL-BEARINGS.'
10. HORSE-SHOE-MAGNETS, TO PRODUCE ELECTRIC CURRENT IN THE
ARMATURE .

I CLAIM :
A POWER DELIVERING WHEEL, WHICH IS A PERPETUAL MOTION MACHINE WORKING ON GRAVITY FORCE. FREE FALLS OF A GROUP OF WEIGHTS FROM ONE END TO THE OTHER END OF A SQUARE TUBE OPERATE THE MACHINE. THESE FREE-FALLS, TWO PER ROTATION ARE CONTINUOUSLY AVAILABLE, BECAUSE OF PROPER SELECTION OF WEIGHT OF THE FLOWING MASS, SUITABLE TO THE FLY-WHEEL CHOSEN, BY TRIAL. THIS MACHINE IS NEVER STOPPED EXCEPT BY MANUAL MEANS .
THIS IS GENERALLY A STATIONARY ENGINE OF UNLIMITED SIZE CAPABLE OF CONTINUOUS POWER OUT-PUT FROM GRAVITY FORCE, WHICH IS UNIVERSALLY AVAILABLE IN ANY PLANET.