It is a very low cost and simple alternative, compared to other complicated, very hi tech and expensive security products like IR beam, Laser lights etc. to prevent Trespassing, Stealing, Robbery, Pilferage and unauthorized forced access. Our system or any product made with this system, may be more reliable, secure and beautiful even than the electrocuted barbed wiring.
Any item with these conductor Lines, may be beneficial for Security forces, Border areas, High Security Zone boundaries and peripheries, Police, Govt. Departments, Industrial & Commercial establishments, At home or office for Security Conscious People, Designers, Builders, Banks, Privacy places, Railway Stations, Airports, Jewellers, Malls, and many other areas where security is of prime concern.
Such products may have one or two layers of Safety / Security. 1- Nothing can pass through it, without being Noticed. This is controlled by Main Conductor Line 2- It can sense any thing near its surface. This can be controlled by Optional Secondary Conductor Line
This system has compulsory atleast one Main Conductor Line. And can have Optional Secondary Conductor Line to make a set with Main Conductor Line.
Main as well as Secondary conductors can be (a) either embedded throughout, inside the product surface or solid mass, or (b) pasted/ fastened/ attached inside or outside of any product body (c) Sandwiched between two surfaces of similar or different things.
Any item with this system, can be used as a part or complete Standalone Doors, Windows, Partitions, Fencing, Main gates, False ceilings, Partitions, Floors, Walls, Cupboards, Vehicles, as a Cladding, Tile, Containers, or in any other form.
Item with this system, may or may not be bullet proof, can or can not be installed anywhere, indoor or outdoor, in any frame or installed standalone. Item can be in any 2D or 3D shape or profile.
Page 2 of 5
Main Conductor line has one independent continuous Non enamelled / enamelled or insulated electrical wire / some conductive material / Printed Circuit / paint, spread haphazardly or in any pattern, with any size of gaps,
Both ends of the independent wire / conductive material/ Printed Circuit / paint, coming out of the item may be connected with a relay or anything else. AC or DC supply is passed and normally remain connected through the wires / conductive material / Printed Circuit / paint. More than one such independent wires / conductive material / Printed Circuit / paint can be incorporated, with any item.
If any puncture, cut or breakage is caused on the item with this system, by any means, on the area more than the wires / conductive material / Printed Circuit / paint gaps, it will break the wire / conductive material / Printed Circuit / paint along with the circuit continuity, which will activate any Alarm, Camera, Light or any Mechanized system, connected with it, through a relay or by any other means.
Secondary Conductor Line is optional line and not necessarily included in the system. If included, it will be one independent continuous Non enamelled / enamelled or insulated electrical wire / some conductive material / Printed Circuit / paint, parallel to the Main Conductor Line. Both lines are separated with some sort of insulation. At different locations, there may be single or multiple conductive plates / material / film with a separator or discrete Capacitive/ Inductive Touch sensors, and connected with both conductor lines. Both ends of this Secondary Conductor line come out of the product body, and are connected with any electric / electronic circuit etc. Whenever presence of any human or animal body / Metal / Non Metal item is sensed by the sensors, the electronic circuit will activate to raise alarm or record things.
BRIEF DESCRIPTION
The “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR” mainly consists of following;
1- BODY - ( Figure -1)
One of the main part is body of any item or product, which may be existing one or is made specifically for this Security system.
Page 3 of 5
It can be Transparent / Translucent / Opaque Glass, Plastic, FRP, Paper, Wood, Fabric, Leather, Ceramic, Metal or nonmetal, any conductive or nonconductive material, or anything else, in any thicknesses with plain, 2D / 3D or textured surface. Material may or may not be water & weather resistant, termite proof, and can be painted or not.
Body could be made by any suitable process.
Opaque items will hide wires / conductive material / Printed Circuit / paint laid inside it, for better protection.
Main as well as Secondary conductors can be (a) either embedded throughout, inside the product surface or solid mass, or (b) pasted/ fastened/ attached inside or outside of any product. AC or DC supply is passed through circuit.
Items with this system can be standalone type, or to be fitted in any frame, or could be a separable or non-separable part of any other product itself.
2- INTERNAL CIRCUIT - This system has compulsory atleast one Main Conductor Line. And can have Optional Secondary Conductor Line to make a set with Main Conductor Line.
Main Conductor line( Figure -2) has one independent continuous Non enamelled / enamelled or insulated electrical wire / some conductive material / Printed Circuit / paint, spread haphazardly or in any pattern, with any size of gaps,
Both ends of the independent wire / conductive material/ Printed Circuit / paint, coming out of the item may be connected with a relay or anything else. AC or DC supply is passed and normally remain connected through the wires / conductive material / Printed Circuit / paint. More than one such independent wires / conductive material / Printed Circuit / paint can be incorporated, with any item.
If any puncture, cut or breakage is caused on the item with this system, by any means, on the area more than the wires / conductive material / Printed Circuit / paint gaps, it will break the wire / conductive material / Printed Circuit / paint along with the circuit continuity, which will activate any Alarm, Camera, Light or any
Page 4 of 5
Mechanized system, connected with it, through a relay or by any other means.
Secondary Conductor Line is optional line and not necessarily included in the system. If included, it will be one independent continuous Non enamelled / enamelled or insulated electrical wire / some conductive material / Printed Circuit / paint, parallel to the Main Conductor Line. Both lines are separated with some sort of insulation. At different locations, there may be single or multiple conductive plates with a separator or discrete Capacitive/ Inductive Touch sensors, and connected with both conductor lines. Both ends of this Secondary Conductor line come out of the product body, and are connected with any electronic circuit etc. Whenever presence of any human body /Metal/ Non Metal item is sensed by the sensors, the electronic circuit will activate to raise alarm or record things.
There is no fixed pattern of both wires / conductive material/ Printed Circuit / paint laying in the product, to remove chances of any speculations.
Any wire / conductive material / Printed Circuit / paint gaps can be maintained to any size, within the product which can be reduced or increased for any specific requirements.
Wires / conductive material / Printed Circuit / paint ends coming out of the product, may not at any specific position, to avoid easy shortening and bypassing, by anybody, to avoid any mischief.
More than one such independent Main Conductor Line or a set with Secondary Conductor Line, can be incorporated in or on any product.
3- EXTERNAL CONNECTION & CIRCUIT - Main Conductor Line (Fig-3)
a) One line from the power source is connected direct to one terminal of Alarm etc. as well as to one terminal of the relay coil.
b) Second line from power source is connected with common of the relay as well as with one end of the independent wire /
Page 5 of 5
conductive material / Printed Circuit / paint coming out of the product.
c) Second end of the independent wire / conductive material / paint, coming out of the product, be connected with the second coil terminal of the Relay.
d) Second terminal of Alarm etc. be connected with NC of the relay.
As soon as the power supply is turned ON, it will pass through the product and will activate the relay. Whenever there is any breakage, puncture, on the area of the product, bigger than the wire / conductive material / Printed Circuit / paint gap inside the product, the circuit continuity will break, causing relay to deactivate and activate the alarm etc.

CLAIMS
1- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, is a novel concept to prevent Trespassing, Stealing, Robbery, Pilferage and unauthorized forced access.
2- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, has one Main Conductor Line, which is Independent and continuous Non Enamelled / enamelled or insulated electrical wire/ Printed Circuit / some conductive material / paint, spread haphazardly or in any pattern, and with any size of gaps. Both ends of such each independent wire / some conductive material / Printed Circuit / paint, may come out from anywhere of the item surface, and may be connected with an independent relay or anything else. AC or DC supply is passed, and normally remain connected through the wire / conductive material / Printed Circuit / paint. More than one such independent systems can be incorporated in one item. If any puncture, cut or breakage is caused by any means, on the area more than the gaps of independent wire / conductive material / Printed Circuit / paint, it will break the wire / conductive material / Printed Circuit / paint & the circuit continuity, which will activate any Alarm / Camera / Light / any Mechanized system, connected with it, through a relay or by any other means.
3- I claim that in my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, may or may not have a Secondary Conductor Line, which will be one independent continuous Non enamelled / enamelled or insulated electrical wire / some conductive material / Printed Circuit / paint, parallel to the Main Conductor Line. Both lines are separated with some sort of insulation. At different locations, there may be single or multiple conductive plates / material / film with a separator or discrete Capacitive/ Inductive Touch sensors, and connected with both conductor lines. Both ends of this Secondary Conductor line come out of the product body, and are connected with any electric /electronic circuit etc. Whenever presence of any human or animal body / Metal / Non Metal item is sensed by the sensors, the electronic circuit will activate to raise alarm or record things. Sensors installed may be other than Capacitive/ Inductive Touch sensors.
Page 2 of 3
4- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, can be any item, which is already available, and by pasting / fastening / attaching / painting the wires / conductive material / Printed Circuit / paint, inside or outside of it, the security system can be developed.
5- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, can be any new item designed & made by any suitable process, in any material with provision to lay wires / conductive material / Printed Circuit / paint, embedded within its surface or solid mass, during it’s making .
6- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, can be used with any item, which may be in any 2D or 3D shape or profile, Transparent / Translucent / Opaque, made of Glass, Plastic, FRP, Paper, Wood, Fabric, Leather, Ceramic, Metal or nonmetal, any conductive or nonconductive material, or anything else, in any thicknesses with plain / 2D / 3D or textured surface. Material of the item may or may not be water & weather resistant, termite proof, can be painted or not, may or may not be bullet proof, can be placed on or under the ground, over or in the water or in the Air.
7- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR”, incorporated with any item, can or can not be installed anywhere indoor or outdoor, in any frame or be installed standalone, could be a separable or non-separable part of any other product itself.
8- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR” incorporated with any item, can be used as a part or complete standalone Doors, Windows, Partitions, Fencing, Main gates, False ceilings, Partitions, Floors, Walls, Cupboards, Vehicles, as a Cladding, Tile, Containers, or in any other form, or placed between other sheets or surfaces.
9- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR” can be incorporated or installed with other Security Products and Systems also.
Page 3 of 3
10- I claim that my “SECURITY PRODUCTS WITH ELECTRIC CONDUCTOR” may also be known in any of the following, or similar meaning names, in any Language, Font, Style or Form;
- Trespassing Prevention System
- Trespassing Prevention Products
- Security Sheet
- Security Product / s
- Anti-Trespassing Product
- Anti-Trespassing Sheet
- Trespassing Barrier
- Stealing, Robbery, Pilferage Prevention Product
- Security Product with Embedded Circuit